Aluminium windows and doors

Aluminium windows and doors

When designing a modern home, it is important to go beyond walls and floors. The moving parts i.e., our windows and doors need more consideration than we tend to give. In this blog, B&W Windows Group explores seven surprising factors that can influence the lifespan of your windows and doors.

From material selection and installation quality to environmental exposure, these often-overlooked details can make a significant difference in how well they perform over time.

The Material You Pick for Your Frames

The core frame material you choose dictates how well your fixtures hold up over time. Many materials are easy on the pocket but more prone to rot and fungal issues. Some quickly turn brittle and discoloured when summers begin.

That is why heavy duty aluminium frames are such a reliable choice for modern homes. When treated with quality finishes, strong aluminium windows and doors easily handle tough weather without swelling, rusting, or warping out of shape. 

Local Weather and Coastal Salt Air

Where we build our home plays a massive role in how fast materials wear down. Across Sydney, different areas bring different challenges, like ocean breezes along the coast or heat in our cities.Airborne salt is tough on standard fittings because it slowly eats away at metals and paint.

Homes near the beach need marine grade coatings, stainless steel parts, and extra sealing to stop salt from building up.Strong sunshine also bakes low quality rubber seals until they crack and shrink. Picking frames made to withstand these conditions keeps the seals tight and stops colours from fading prematurely.

How Well They Are Installed

Even the best frames will fail early if the fitting work is rushed or done poorly. When installersdo not fit frames square and level, the weight of the glass gets distributed unevenly.

This puts constant strain on hinges and tracks, leading to sticking panels, draughty gaps, and water leaks. Poor flashing around the opening also lets rainwater creep into cavity walls, which ruins internal plasterboard and timber frames.

Knowledgeable installers always use proper damp proofing, accurate shims, and flexible sealants. Getting experienced local specialists guarantees that your aluminium windows and doors Sydney-specific installation stays completely watertight and easy to open.

The Quality of Hinges, Handles, and Seals

We rely on handles, hinges, and rollers every single day without even realising. This is where cheap hardware uses plastic rollers or standard steel screws that wear out surprisingly fast under regular use.

Moreover, worn out rollers flatten over time, forcing you to drag sliding panels along metal tracks and scratching the finish. Loose or stiff weather seals also let cold draughts and rainwater drift straight into your living room.

Upgrading to stainless steel rollers and tough alloy hardware makes a huge difference. Double rubber seals and heavy duty rollers keep your large aluminium doors sliding smoothly and quietly for decades.

The Type of Glass You Choose

Glass takes up most of the space in any frame, so picking the right type matters. Extreme temperature differences between the inside and outside of a room can create thermal stress, which leads to sudden glass cracks.

Single pane glass gives very little protection against heat, cold, or loud outside noise. Toughened glass or double glazed units give your home much better structural strength, safety, and energy savings.

Double glazing with quality spacers keeps internal glass surfaces warm and prevents messy condensation. Protecting your glass from thermal stress protects frame seals and keeps your home comfortable in every season.

How Often You Clean the Tracks

We all know how easy it is to forget about cleaning window tracks during regular house chores. However, dust, dirt, and salt dust gather inside sliding tracks quickly and block bottom drain holes.

When drain holes get clogged, rainwater pools inside sub-frame channels and leaks into your home, ruining lower seals. Washing frame surfaces with warm soapy water every few months removes salt deposits before they damage the finish.

A quick bi-annual clean to clear out dirt and a light spray of silicone lubricant on moving parts works wonders. This tiny habit stops metal friction and keeps your fittings gliding effortlessly year after year.

Natural Building Movement and Temperature Shifts

Every house settles slightly over time due to micro movements and temperature changes. Metal frames too expand slightly on hot summer days and contract when the temperature drops.

However, quality engineering at B&W Windows Group plans for this natural movement by leaving flexible gaps and using stretchy perimeter sealants. This stops our frame from cracking or pressing too hard against the glass panels with such dynamic changes.

Choosing custom made aluminium windows built to exact measurements also allows your home to move naturally without losing its airtight seal. It keeps your seals intact and ensures your sashes continue operating smoothly.

Ultimately, Expertise and Experience Matters

Getting the longest life out of your home fixtures comes down to quality materials, skilled fitting, and choosing frames built for our climate. When you search for aluminium doors and windows near you, picking a team that knows all these aspects makes it easier for you to decide.

For homeowners and commercial owners, B&W Windows Group has done it for nearly five decades. With a wider range of options across aluminium windows and doors, all made with 100% Australian quality standards, we know how important your investment is.

If you’d like to invest for long-term home upgrades, we have it all and we have it at the best prices. Reach out to B&W Windows Group and get yourself the best deals this Christmas!

FAQs

1. How long do aluminium windows and doors last?

High quality aluminium frames easily last 30 to 50 years without rusting or rotting. Moving components like rubber seals, rollers, and locks typically need replacing every 10 to 20 years to maintain smooth operation.

2. What causes windows and doors to deteriorate?

Intense UV rays break down rubber seals, while coastal salt air erodes frame finishes. Dirt trapped inside sliding tracks and blocked drain holes also force rollers to drag, straining hardware and causing leaks.

3. How often should aluminium windows and doors be maintained?

Cleaning frames and wiping tracks every three to six months keeps your fixtures working smoothly. Coastal homes need monthly fresh water rinses to remove salt, along with a quick silicone spray on rollers bi-annually.

4. When should old windows and doors be replaced?

Replace old fixtures if you notice draft entry, persistent water leaks, or foggy double glazed glass. If sliding panels keep sticking despite new rollers, warped frames or outdated insulation justify a modern upgrade.

5. Does double glazing prolong the life of hardware and frames?

Double glazing creates a stable thermal barrier that keeps interior frame surfaces dry and reduces temperature swings across frame profiles. Minimising internal condensation helps protect seals and hardware from moisture related wear.

6. How do custom made aluminium windows perform compared to standard off the shelf options?

Custom manufactured windows are built to exact wall opening dimensions and engineered for specific building wind loads. This precise fit ensures proper perimeter sealing, flawless sash operation, and maximum structural lifespan compared to mass produced stock units.